How to operate the V2L function of the MG4 car

The V2L (Vehicle to Load) feature on the MG4 vehicle allows the electric vehicle to power external devices by converting the built-in DC battery power to 220V AC power for domestic use. Here are the basic steps to use the V2L feature:

1. Prepare the equipment: Make sure your MG4 is V2L capable and that the vehicle is fully charged.

2. Plug in: Insert the discharge plug into the vehicle's AC charging port.

3. Wait for the prompt: After inserting the plug, wait for the vehicle's center screen to display the discharge prompt.

4. Acknowledgement of discharge: After receiving the discharge prompt, acknowledge the discharge and then you can directly connect the plug or electrical equipment.

5. Ending the discharge: After using the electrical appliances, turn off all the appliances and unplug them from the power supply, then click on End Discharge on the vehicle's central control screen, and finally unplug the discharged plug.

Please note that although the V2L adapter offers convenience, it must be used in strict compliance with the relevant safety regulations to avoid danger. If you have any questions about the use of the V2L adapter, it is recommended that you consult a professional or relevant information.